If you have a fire or water emergency, please call us now at (210) 348-2911

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

5 Common Causes of Commercial Building Fires

1/20/2020 (Permalink)

5 Common Causes of Commercial Building Fires

The past decade, these five causes were identified as the most common reasons behind commercial fires.

  1. Cooking/Kitchen Appliances

Year after year, cooking fires remain at the top of the list as a cause of non-residential fires with 25% to 30% of those fires being cooking-related. The fires sometimes started because of human error while cooking and sometimes by an appliance malfunctioning.

Because kitchens are an extremely high-risk zone, strong effort should be taken to ensure they are more than adequately protected. Sprinklers, alarms and easily accessible fire extinguishers are an absolute must.

  1. Arson/Intentional

Arson, or an intentional fire, is the next common cause of a non-residential fire, with roughly 10% of fires occurring from arson. Unfortunately, this type of fire causes the most damage to buildings and the highest number of injuries or death in building occupants.

Intentional fires are most likely to occur after working hours, between 3 p.m. to 12 a.m. Fires during later hours of the day often do far more damage than ones started during working hours, as there is no one available to sound an alarm.

An arsonist may start a fire anywhere, but bathrooms, trash cans, dumpsters and garages are likely spots. This is a great example of why you should take care to include fire detection and prevention systems in unlikely places, such as behind the building.

While you can’t prevent arson completely, you can take precautions to limit the damage and opportunities:

  • Make sure trash cans are emptied every day.
  • If possible, keep dumpsters away from the building so a dumpster fire can’t spread to the building.
  • Keep trees and shrubs trimmed to make them harder to set on fire and so arsons can’t use them for cover while setting a fire.
  • Put up motion detection cameras or lights in dark or normally unused areas so any fires can be caught and put out faster.
  • Install smoke/fire curtains near the doorways of the areas most likely to be used for arson.

Since an intentional fire can truly occur anywhere, there is, unfortunately, no way to plan for it. Instead, take the above precautions and focus on standard placement of fire detection and control products within doorways, atriums and elevators.

  1. Human Error/Unintentional

Human error, or unintentional fires, are also responsible for about 10% of fires. Because there are a vast number of reasons why a fire might occur accidentally, employee fire safety training is extremely important.

Some examples of an unintentional fire include cigarettes being improperly discarded, employees leaving heating equipment too close to walls or flammable surfaces, forgetting to blow out a candle, keeping a messy workstation or improper use of electrical devices (e.g. extension cords).

Because unintentional fires, like intentional fires, can’t be easily predicted or avoided, it’s essential to educate employees on fire prevention and safety practices and install plenty of fire prevention systems, such as fire alarms and fire and smoke curtains.

  1. HVAC System Malfunction

Roughly 9% of fires happen when an HVAC system malfunctions. This includes central heating systems, as well as water heaters, space heaters, and other appliances.

Heating systems should be regularly inspected, especially during winter when they are used most heavily. And always ensure flammable materials are kept well away from heat sources.

Areas where the main HVAC system is housed, as well as any water heaters or storage rooms, should be outfitted with smoke alarms. That way if the system does cause a fire, it can be caught and addressed as quickly as possible.

  1. Electrical Malfunction

About 7% of fires are linked to an electrical system malfunction, often due to problems with wiring in the building. These fires are more likely to occur in older buildings with questionable wiring.

However, building owners should also have a new building's wiring systems inspected by a professional as well. Having follow-up preventative checks every few years is also a good idea, especially for buildings that have heavy energy users.

Rooms housing significant electronic systems should have smoke alarms, but in many cases, water sprinklers should be avoided; alternatively, specialized chemical foam sprinklers can be installed. These function just like water sprinklers, but use foam instead of water, designed to extinguish fire in sensitive electronic equipment.

If your home or business has suffered a fire or smoke damage, please call today for the professionals at SERVPRO of Olmos Park. Here to Help.

Source: Smoke Guard Online

Other News

View Recent Posts